Clearmist oil mist collector, applying the latest oil mist treatment technology in Europe, is characterized by small size, large air volume and easy maintenance, removing oil mist.

Clearmist Uk Technology

* There are four speciallydesigned blades on the inner wall of the drum, which rotates at highspeed, and the oil mist is sucked into the drum, colliding with the blade at high speed tocondensethe oil mist.

* Drum pad composed of special material and structure could filter solid particles and reducenoise.

* Centrifugal force pushesthe oil out of the oil mist collector, allowing it to flow back to themachine for reuseor collection.

* Cleanair is returned to the workshop through the top of the oil mist collector.

Specification:

1675 @ 50Hz

1.5kW 50Hz

200v,220v,

380v,400v, 415v

2000 @ 60Hz

2.2kW 60Hz

200v,220v,230v,

440v,460v,480v

Specification:

1250 @ 50Hz

1.1kW 50Hz

200v,220v,

380v,400v, 415v

1500 @ 60Hz

1.5kW 60Hz

200v,220v,230v,

440v,460v,480v

Specification:

800 @ 50Hz

0.55kW 50Hz

200v,220v,

380v 400V 415V

500 @ 60Hz

0.55kW 60Hz

220v, 230v, 240v,

440v,460v, 480V

Specification:

425 @ 50Hz

0.55kW 50Hz

200v，220v，

380v，400V，415V

500 @ 60Hz

0.55kW 60Hz

220v, 230v, 240v,

440v,460v, 480V

Model : HL-D-DNC-430DT

Model : HL-D-DNC-1003DD

Model : HL-D-DNC-2030DT

1, X-axis: 400mm,Y-axis: 300mm;Z-axis:120mm;

2, Principal axis:

Number of revolutions per minute: 3000~60000rpm (optional);

Principal axis tapered hole: ER20;

Principal axis Power (output):0.55kw~3.0kw(optional);

3, Travel speed:

X-axis:25m/min，Y-axis:25m/min，Z-axis:25m/min；

4, Processing capability：

Drilled hole：1~14mm；

Chamfer: 1~14mm;

5, Cutlery: Manual tool change;

6, Repeat Positioning Accuracy: ±0.02mm;

7, Working platforms Size: 600mm*280mm;

8, T-slot Size: Top width 13mm*Bottom width 20mm.

1, X-axis: 800mm,Z-axis: 200mm;Y-axis: 360degrees;

2, Principal axis:

Number of revolutions per minute: 1500~24000rpm (optional);

Principal axis tapered hole: ER20;

Principal axis Power (output):0.55kw~3.0kw(optional);

3, Travel speed:

X-axis:30m/min~60m/min，Z-axis:25m/min；

4, Processing capability：

Drilled hole：1~20mm；

Tapped: M2~M16;

Chamfer: 1~20mm;

5, Rotary axis clamping diameter: 10~200mm(optional);

6, Cutlery: Manual tool change;

7, Repeat Positioning Accuracy: ±0.02mm

1, X-axis: 2000mm,Y-axis: 300mm;Z-axis:200mm;

2, Principal axis:

Number of revolutions per minute: 1500~24000rpm (optional);

Principal axis tapered hole: ER20;

Principal axis Power (output):0.55kw~3.0kw(optional);

3, Travel speed:

X-axis: 30m/min~60m/min，Y-axis:25m/min，Z-axis:25m/min；

4, Processing capability：

Drilled hole：1~20mm；

Tapped: M2~M14;

Chamfer: 1~20mm;

5, Cutlery: Manual tool change;

6, Repeat Positioning Accuracy: ±0.02mm;

7, Working platforms Size: 2000mm*280mm

Number of linkage axes：Support 3 axes linkage；

X Axis travel：700 mm；

Y Axis travel：400 mm；

Z Axis travel：200 mm；

Spindle nose to table：170～380 mm；

Working table size：700*450 mm；

Spindle driven motor：6 KW；

Spindle speed：15000 rpm；

Rigid tapping speed：6000 rpm；

Spindle taper： BT30；

Guide X/Y/Z：Taiwan HIWIN Ball guide；

Ball screw rod X/Y/Z ：Taiwan HIWIN hign-speed mute；

Driven motor X/Y/Z：1.3/1.3/1.3 KW；

X/Y/Z Rapids：48 m/min；

X/Y/Z Positioning precision：0.02 mm；

X/Y/Z Repeating precision：0.01 mm；

Tool magazine specifications：10T

Z PT-L-A: Have PT-L-A

Tool change：5 sec；

Coolant system： High pressure water cooling；

Lubricating system：Automatic Lubricating；

File transfer method：USB/Manual programming；

Power supply ：Three phase AC380V；

Air required：0.6 MPa；

Total Power：10 KW；

Number of linkage axes：Support 4 axes linkage；

X Axis travel：600 mm；

Y Axis travel：400 mm；

Z Axis travel：330 mm；

Spindle nose to table：150～480 mm；

Working table size：700*420 mm；

Spindle driven motor：5.5 KW；

Spindle speed：20000 rpm；

Rigid tapping speed：6000 rpm；

Spindle taper： BT30；

Guide X/Y/Z：Taiwan HIWIN Ball guide；

Ball screw rod X/Y/Z ：Taiwan HIWIN hign-speed mute；

Driven motor X/Y/Z：1.5/1.5/3.6 KW；

X/Y/Z Rapids：48 m/min；

X/Y/Z Positioning precision：0.005 mm；

X/Y/Z Repeating precision：0.003 mm；

Tool magazine specifications：21T Umbrella knife magazine Taiwan Shengjie；

Tool change：1.5 sec；

Coolant system： High pressure water cooling；

Lubricating system：Automatic Lubricating；

File transfer method：USB/Manual programming；

Power supply ：Three phase AC380V；

Air required：0.6 MPa；

Total Power：15 KW；

We are committed to excellence in everything we do and look forward to working with you!

HOME

All Products

Why Choose Us

Sales Network Advantage

PRODUCTS

ABOUT  US

CONTACT US

 Oil mist collector

Numerical control machine tool

Know Us

Enterprise Information

Production Line

Contact Us

Price is in US dollars and excludes tax and handling fees

© 2024 LingXi Ltd. Trademarks and brands are the property of their respective owners.